Netboot Mailing List (by thread)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MS-DOS PXE boot problem on VIA Epia 5000



Title:
Hello,

Thank you for the idea. I'm quite newbie in diskless terminals...
I tried what you mentioned, but it did not work. The PXE loader loads the pxelinux.0 file, and after that the PC freezes at the point where the loader tries to read the config file. Each file is in the right directory.
The DHCP server is MSW2k Server (BOOTP is enabled), the TFTP server is Winagents TFTP server.
 
Üdvözlettel:
 

Cser Gábor ügyvezető

Tel: +36 (70) 3365566

 




Digitop Informatika Kft.

Levelezés: 9400 Sopron, Heimler Károly u. 1.

Iroda: 9400 Sopron, Paprét 17.

Tel: +36 (99) 506206 Fax: +36 (99) 506205


 

-----------------------------------------
 
Original Message: 
From: Alexander Heinz  
To: netboot@baghira.han.de 
Sent: 9/29/04 2:54 PM 
Subject: Re: MS-DOS PXE boot problem on VIA Epia 5000
 
> I try to boot DOS 6.22 from network with PXE. I have an VIA EPIA 5000 mainboard with on-board network card with built in PXE. The image is downloaded to the client successfully, but when is starts to boot, I get a "non-system disk or disk error" error message and the PC hangs. 
> I read over the archive and found some ideas, but no success with them... 
> I changed the boot sector ( to altboot.bin), the result is better, I get a "Starting MS-DOS" message and the PC hangs... 
> The PXE bootstap image is from rom-o-matic. 
>  
> If somebody has experience with this, please help me. 
 
to boot a DOS floppy image with a PXE-capable card (not etherboot /  
netboot): 
 
- create an image of the floppy: 
    dd if=/dev/fd0 of=floppy.img 
 
- copy the image to your tftp-server directory (e.g. /tftpboot) 
 
- copy pxelinux.0 and memdisk of the syslinux package (see  
http://syslinux.zytor.com ) to your tftp-server directory 
 
- create a sub-dir 'pxelinux.cfg' 
 
- create the file 'pxelinux.cfg/default': 
DEFAULT dos 
TIMEOUT 0 
LABEL dos 
KERNEL memdisk 
append initrd=floppy.img 
 
- the DHCP server configuration should contain a line like this one: 
filename "/tftpboot/pxelinux.0"; 
 
Cheers 
Alex 
 
--  
send fax $pam to +49190819141676 or 0190819141676 (1.86 Euro/min) 
 
=========================================================================== 
This Mail was sent to netboot mailing list by: 
Alexander Heinz  
To get help about this list, send a mail with 'help' as the only string in 
it's body to majordomo@baghira.han.de. If you have problems with this list, 
send a mail to netboot-owner@baghira.han.de. 

==========================================================================This Mail was sent to netboot mailing list by: =?ISO-8859-2?Q?Gábor_Cser?= To get help about this list, send a mail with 'help' as the only string in it's body to majordomo@baghira.han.de. If you have problems with this list, send a mail to netboot-owner@baghira.han.de.


For requests or suggestions regarding this mailing list archive please write to netboot@gkminix.han.de.